JVP DP Series
Double Pump Dry Vacuum Pumps
The JVP DP series of vacuum pumps are used in industrial arena where large amounts of flow is needed to run your industrial equipment. These pumps can produce independant vacuum and pressure levels from a single source. They are used where large amounts of vacuum and/or pressure is needed to run robotics, vacuum conveyors, laminators, printing presses, feeders, etc. These pumps are capable of producing vacuum levels of up to 25 inches of mercury. The JVP DP Series of pumps can produce well over 150 CFM of vacuum and pressure.
| Model | Hz | Max Vacuum | Max Pressure | Vacuum CFM | Blower CFM | Info | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| inHg | KPA | PSI | KPA | CFM | m3/hr | CFM | m3/hr | |||
| JVP-3DP | 60 | 25 | 84.6 | 8.5 | 58.6 | 7.4-14.8 | 25.2~50.4 | 7.4-14.8 | 25.2~50.4 | |
| 50 | 25 | 84.6 | 8.5 | 58.6 | 7.4-14.8 | 21.6~43.2 | 7.4-14.8 | 22.2~44.4 | ||
| JVP-5DP | 60 | 25 | 84.6 | 8.5 | 58.6 | 13.6 ~ 27.2 | 46.2~92.4 | 13.4 ~ 26.8 | 45.6~101.2 | |
| 50 | 25 | 84.6 | 8.5 | 58.6 | 13.6 ~ 27.2 | 39~78 | 13.4 ~ 26.8 | 39.6~79.2 | ||
| JVP-6DP | 60 | 25 | 84.6 | 8.5 | 58.6 | 19.8 ~ 39.6 | 67.2~134.4 | 19.1~38.2 | 55.8~111.6 | |
| 50 | 25 | 84.6 | 8.5 | 58.6 | 19.8 ~ 39.6 | 58.8~117.6 | 19.1~38.2 | 55.8~111.6 | ||
| JVP-7DP | 60 | 25 | 84.6 | 8.5 | 58.6 | 40~80 | 130~260 | 40~80 | 130~260 | |
| 50 | 25 | 84.6 | 8.5 | 58.6 | 40~80 | 110.5~221 | 40~80 | 110.5~221 | ||
| JVP-8DP | 60 | 25 | 84.6 | 8.5 | 58.6 | 47~94 | 138~276 | 47~94 | 138~276 | |
| 50 | 25 | 84.6 | 8.5 | 58.6 | 47~94 | 120~240 | 47~94 | 120~240 | ||
| JVP-10DP | 60 | 25 | 84.6 | 8.5 | 58.6 | 51~102 | 168~336 | 49.5~99 | 168~336 | |
| 50 | 25 | 84.6 | 8.5 | 58.6 | 51~102 | 146~292 | 49.5~99 | 146~292 | ||
| Note: | Specifications may vary based on pump configuration. Choose your pump to review all details, customizations, and performance charts. | |||||||||