JVP

Jallo Vacuum Pumps




JVP-3 JVP-5 JVP-6 JVP-7 JVP-8 JVP-10

JVP-5 Vacuum Pump

Standard Series Dry Vacuum Pump

The JVP-5 Vacuum pump is a oil-free dry running vane pump. It is a stock item from the JVP line of pumps. This pump can produce up to 25 inches of Mercury, and up to 13.6 CFM (cubic feet per minute). The JVP-5 would typically use a 1.0 hp or .75kW three phase motor, but can also be coupled with a single phase motor. The modular configuration makes this pump very easy to maintain, with one knob nut to replace or inspect filters. It is a direct coupled direct drive vacuum pump which runs at 1700 rpm.

The standard porting on the JVP-5 is two (2) 3/4 “ NPT ports for the vacuum. One for the vacuum regulator, which is standard, and the second port is for you to hook up to your application. There would also be a 1/4“ NPT port with a vacuum gauge.

 Option: Two 3/4“ NPT ports for the pressure, with a 1/4“ port for the pressure side.
 Option: Complete vacuum setup for Vacuum, ported for vacuum, without motor.
 Option: Vacuum pump only. Complete pump, less base, and manifold, motor and coupling.

These pumps are in production daily on printing presses, vacuum frames, robotic arms, etc. The JVP-5's rugged design makes it suitable for most industrial applications.

If this pump works for you, but you would also like to have a second one ported for pressure,
check out our JVP-5DP.

  JVP-5DP  

Model Hz Max Vacuum Max Pressure Vacuum CFM Blower CFM Motor RPM
inHg KPA PSI KPA CFM m3/hr CFM m3/hr
JVP-5 60 25 84.6 8.5 58.6 13.6 23.1 13.4 22.8 1700 1.0HP, 0.75kW
50 25 84.6 8.5 58.6 11.5 19.5 11.7 19.8 1450


Model Suction/Exhaust Port Diameter Motor Weight
KGs LBs
JVP-5 RC3/4 Female NPT 3-Phase .75kW 4P 33 72.8
W H A B C D E F G
560mm 265mm 45mm 200mm 230mm 250mm 220mm 308mm 4-ø9mm
L J K L1 M N O P
388mm 40mm 95mm 40mm 32mm 80mm 50mm RC 3/4"




Standard Vacuum Manifold Setup
Includes JVP™ Brand Fitment Orion™ Brand Fitment Configuration Options
  1. One (1) Vacuum Regulator.
  2. One (1) Vacuum Gauge.
  3. Ported two ports on top, vacuum side.
  4. Ported one port on side, vacuum side.
 Other Manifold SetupsMore Info

View:
Top Front and Rear view of Standard JVP-3 and JVP-5 Standard Manifold. Setup for vacuum only.

View:
Front and Side view of Standard JVP-3 and JVP-5 Standard Manifold. Setup for vacuum only.

View:
Pressure Side view of Standard JVP-3 and JVP-5 Standard Manifold. Setup for vacuum only.

Note:
Holes are on manifold opposite vacuum gauge, to allow pump to breathe.



Replacement Parts Manifold Setup Options Download PDF  Request More Information  JVP Standard Mainpage

Back to Top
  • CONTACT:
  •   JVP Pumps
      3029 S 26th Ave
      Broadview, IL 60155

  •   708.410.1780

  •   sales@jallo.com
Copyright © 2017 Jallo Equipment & Supply, Inc.